Waste ink absorber reset on Canon IP1700

Solution 1:

• First power off the printer. Next, while holding STOP/RESET button, power on the printer.
• While holding POWER button, release STOP/RESET button. Then push STOP/RESET button twice.
• Wait about 20-30 second until the LED shows “0″. Then push STOP/RESET button four times.
• Finally push POWER button twice. Last step is to turn off the printer by pressing the POWER button one last time.

Solution 2:

• Unplug power and USB cable.
• Open door and hold power button.
• Connect power.
• Close door, then release power button.

Solution 3:

• Turn Off the printer, and then take off the cable power.
• Push and hold the power button
• Connect again the power cable.
• Use your middle finger to push the resume button 2 times.
• Release the power button.

Related Posts by Categories