Senin, 14 Oktober 2013

How to setup OpenDNS

 The job of a DNS server is to translate web address (like into a computer-readable number also known as an IP address ( Once your computer knows the IP location of a web domain name, it opens the website in your browser.

DNS servers are provided by ISP (like PLDT DSL, GLOBE DSL, and alike) but if the DNS server of our ISP is slow it would take time for the server to translate the web address that adds up to the overall loading time of the website. And this is the time you will experience slow browsing.

To solve this problem, i will teach you on how to setup OpenDNS, a simple and reliable service that speeds up your Internet connection and also handles some other very important issues. There are no software to install, it’s very easy to set up at no cost.

Follow this steps on how to setup OpenDNS and make your web browsing safer, faster,and more reliable

For Microsoft Windows XP, 2000

   1. Open control Panel
   2. click Network Connection
   3. Right click on Local Connection Properties then select Properties
   4. on “General Tab” select Internet Protocol (TCP/IP) then click Properties

   5. Click "Use the Following DNS server addresses"
   6. Change your DNS Server addresses to and and click OK.

For Microsoft Windows Vista and Windows 7
   1. Open Control Panel
   2. Network and Sharing Center
   3. Click on Change adapter Setting

   4. Right Click on Local Area Connection then select Properties

    5. Scroll and double click Internet Protocol Version 4 (TCP/IPVv4)
6. Select Use the following DNS server addresses: and input to
Preferred DNS Server:
Alternate DNS server:
 For EASY SETUP you can use the COMMAND prompt:

   1. Run
   2. cmd – this will open your command prompt
   3. And type the following

    netsh interface ip set dns “Local Area Connection” static
If you want to block adult content like porn use: and
Read More..

Worlds smallest digital TV Tuner

Sharp developed the worlds smallest digital TV tuner. The small module works with Japanese Seg-1 terrestrial digital broadcast (Wansegu).

The Sharp TV tuner module measures only 7.3×7.3×1.25mm. This is small enough that Scalar could integrate it right away into their ultra-lightweight Head mounted displays. Sharp also managed to design the VA3A5JZ912 tuner module to use only 85mW of power. This should increase the battery life when watching TV on a mobile phone.
The mass production will start in September 2007. Sharp plans to make 1 million units per month.

Read More..

Minggu, 13 Oktober 2013

How to reset Brother MFC printer

 This Reset Procedure is for Brother MFC Series Printer

Problem: Brother MFC Printer display "unable to clean" or Error 46

  • First turn of the printer
  • Switch on the machine while holding down the menu button until all the leds are flashing on/off. Now you are in “maintenance” mode.
  • Press 80
  • Press the “mono start” button several times until you see “purge: xxxx”
  • Press “2783” in order to reset the purge counter. You will see: “purge:0000”
  • Press the "stop" button.
  • Press “99” to exit the maintenance mode.
and you are done!
Read More..

Download Angry Birds for Android

Beta test version of Angry Birds Lite for Android devices have been released. The survival of the Angry Birds is at stake! Dish out revenge on the greedy pigs who stole their eggs. Use the unique powers of each bird to destroy the pigs fortresses. Angry Birds features challenging physics-based gameplay that requires logic, skill, and force to crush the enemy. Angry Birds Lite Beta will run on second generation Android devices and upwards.

Cinematic Trailer

 Download the app for free from here
Read More..

SSC Service Utility for Epson Stylus Printers

Please, read all instructions in help file before doing anything with Your printer!
Program screenshots:

I hope this helps some of you who are frustrated and ready to throw out your Epson printer
Problems with my Epson printer, the red and green light began flashing and a window popped up, saying, take it to your services center because some parts have reached the end of their life.
Printer companies set a “protection counter” on all printers , it’s an internal counter measuring the amount of ink wasted by head cleaning.

Reset the "protection counter" as well as clean the “waste ink pad overflow”.

1. Unplug the power and USB cables from the printer. Pry open the printer,
careful not to break anything. Use a flat blade screwdriver to pry it apart;
there are two-three tabs at the back and two at the front. Gently push them in,
and then using a bit of force pry apart the cover.
2. Next remove the two (2) waste ink pads.
They are located at the back on the left hand side. I used the flat blade
screwdriver to lift up the ink pads (they were soaked).
Please use rubber gloves as it gets very messy.
3. Next wash them with just plain hot water until they are white again.
I just let the hot water run on them (the pads are about three inches long).

4. Once washed dry them using a hair drier. (you could place it the sun for
a few hours or on top of your heater or maybe in a heated oven; (make sure you do
not set it on fire with too much heat).
5. Once dried place the pads back in the ink waste bin at the back of the printer.
6. Closed the printer cover and put back all the pieces and plug in the USB
& power cable and turned it on. (Yes the lights are still flashing).
7. Go to this link and download this software.want to download software (v4.30)
8. Install the software and run it.
9. Select your printer and model number. It will ask if you replaced with new pads;
say “YES”. Then close the window.
10. Now right click on the SSC service utility, it looks like
a printer icon near your clock in the task bar.
11. Then click on reset counters. You can do all other stuff with this utility too.
12. Turn off the printer power and then turn it on again.
If necessary un-plug the power cord from the back of the printer,
wait 20 seconds. Plug it back in.
Read More..

Epson Stylus C90 Printer

Deskripsi Produk
High-speed printing and affordable Durabrite Ultra INKdividual inks, at amazing quality and convenience.

Affordable INKdividual Cartridges

* Cost-efficient INKdividual cartridges

* Reduce ink wastage and maximise savings

* Replace only the ink cartridge that runs out

* Eliminates wastage of throwing away an integrated cartridge with remaining ink in other color

Greater Efficiency with Cartridge Flexibility

* Choose from two different capacities of ink sets based on usage patterns

* Achieve cost and printing efficiency with cartridge flexibility

Adjustment Program Epson

stylus photo C90 Verion Indonesia download

stylus photo C90 Version Singapore download

Read More..

Sabtu, 12 Oktober 2013

Contact Me

You can send me your comment and suggestion through this form. And I would be thankful to you, for any suggestions or advice you give for the improvement of this blog !

Contact Form




Image Verification
Please enter the text from the image:
[Refresh Image][Whats This?]
Read More..


If you dont understand the method to fill catridge refill 41, try this method ;

Give your comment in guest book and hope it help you friend
Read More..

Picture Mate 500

The Epson PictureMate 500 printer is a personal photo printer that produces affordable high quality photos in the convenience of your home.

Download and use adjustment program to reset.
Read More..

Reset Epson C110

Resetter Epson C110

Download C110 Adjustment Program

Resetter Epson C110
Download C110 Adjustment Program
Read More..

Jumat, 11 Oktober 2013

Canon BJ F900 F890 F700 F500 S900 S820 S750 and S520

Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button.
Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.
You are now in Service mode.
Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1. service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a resta
Read More..

Canon Error Code E073 E074 E075 E076 E077 E079 E080 E081 E082 E083 E084 E085 E086 E089 E090 E091 E100

E073 The transfer drawer connector or the transfer frame drawer connector is not connected as the front door is closed.
E073 The transfer drawer connector or the transfer frame drawer
connector is not connected as the front door is closed.
E074 The transfer belt unit does not reach the target position within a specific time.
E075 The transfer belt is off to the side.
E076 The transfer belt web is wound up
E077 The motor inside the transfer belt unit
has a fault.
E079 The home position (to apply pressure) of the transfer drum cleaner unit cannot be detected.
E080 An error occurs in the communication with the multi color unit controller PCB.
E081 The vertical motor clock is faulty.
unit E081 The vertical motor clock is faulty.
E082 The horizontal motor clock is faulty.
E083 The CD unit horizontal movement right sensor is faulty.
E084 The CD unit horizontal movement left sensor is faulty.
E085 The CD unit feeder release sensor is faulty.
E086 The CD unit claw release is faulty.
E089 A malfunction of the multi color
E090 The document feed motor is not
functioning properly.
E091 A failure in the detection of the document feed sensor.
E100 The BD signal cannot be detected within a specific time.
Read More..

MPTool 0 9 6

MPTool 0.9.6 - the tools necessary to carry out service works with the printer Canon MP-series.

Features MPTool:
- Expanded information on the level of ink in the cartridges (true testimony to the 40-series cartridges for 30 th and 50 th will be correspondingly overstated and understated), and containers for the waste of ink.
- Read, write, and reset the printer EEPROM.
- Reset counters level black and color ink cartridges.
- Reset the counters occupancy "core" and "supplementary" containers for the waste of ink.
Download MP Tool
Read More..

canon ir5000 photocopier printer

50 A4 ppm. Digital System Solution that seamlessly integrates across networks. Multi-tasking Copier, Printer, and Scanner.
Features of the Canon IR5000 Photocopier

* 50 ppm output
* Mailboxes - 100 available
* Scan Once Print Many
* Mixed Original Copying
* Job Build
* Reserve Jobs
* Job Notification
* 5.1 GB Hard Disk
* Remote User Interface

Further Information
Advanced architecture

Utilizing expert embedded controller technology, the Canon IR5000 photocopier is designed from the ground up to operate as a truly multi-functional unit -without single concept restraints. Thus the system is simpler to connect, monitor and control, while overall productivity and flexibility are also enhanced.

High quality, high speed
The Canon IR5000 photocopier delivers high image quality, high speed output for departmental printing and copying. This multifunctional role eliminates the need for dedicated machines, reducing investment outlay. It also offers greater flexibility for printing on different paper sizes, complete with finishing.

Superior image quality

The Canon IR5000 photocopier offers 50ppm output speed with 256-level grayscale support. Taking image quality to the next level, it incorporates innovative image enhancement technologies to deliver an amazing interpolated printing resolution of 2400 x 600 dpi.

Personal Image Server
It is possible to scan and store existing, hard copy documents onto the iR hard disk, using the Personal Image Server. These scanned documents are stored in a personal mailbox and can then be merged with documents processed on a PC. Thus creating a completely new document from two different sources.

Improved reliability
Reliability is a key element of the Canon IR5000 photocopier, ensuring consistent and continuous output. This next generation digital system is based on Canon extensive experience and proven expertise in digital and imaging technology. Complete with the back up of Canon renowned service coverage.

Full, flexible finishing
When the Canon IR5000 photocopier is configured only with an output tray, the image memory allows convenient electronic collation, with cross collated sets. A Finisher F1 is available offering a high output capacity of 2,000 sheets -in sorted, grouped or stapled mode. Up to 50 sheets can be stapled in a single set.

The Canon iR5000 brochure contains

* iR5000 performance information
* iR5000 optional extras
* iR5000 specifications
Download the iR5000 photocopier brochure Canon iR5000 brochure (342.69 kB)
Driver iR 5000/ 6000 series Download
service support tool Download iR 5000/ 6000 series
Download Repair system HDD iR 5000/ 6000 series
Read More..

Kamis, 10 Oktober 2013

How to use Combofix

Combofix is a freeware portable application created by sUBs, it was designed to scan a computer for known malware & spyware and, if found, attempt to automatically clean the infection. It s a effective cleaning tool, which is useful compared to other malware and spyware removers. I use this application very frequently in removing nasty Antivirus 2008 and its variants. In addition it also shows you a log files that you can use to search and remove infections which are not automatically removed.

Malware, short for malicious software, is software designed to infiltrate a computer system without the owners informed consent. The expression is a general term used by computer professionals to mean a variety of forms of hostile, intrusive, or annoying software or program code. -Wikipedia
Spyware is a type of malware that can be installed on computers  and collects little bits of information at a time about users without their knowledge. The presence of spyware is typically hidden from the user, and can be difficult to detect.

How to use combofix:
  • Disable or Close all anti-spyware, anti-malware, antivirus, real-time protection, which may affect ComboFix.
  • Close all running programs of your computer
  • Double click ComboFix.exe on you desktop
  • When Combofix finished, it will create logs for you. 

You can download Combofix Here.
A detailed usage instructions can be found on the official site.

Warning: ComboFix is extremely powerful , You should not run ComboFix.exe unless you know what you are doing. Use ComboFix at your own risk. 
Read More..

Resetter Printer Pixma iP1980

Canon PIXMA iP1980 Photo Printer, featuring the FINE Cartridge for fast and quality photo printing, 2 picoliter ink droplets and resolution of 4,800 x 1,200 dpi, finishes a fine 4" x 6" borderless printing in just 55 seconds. Up to 100-year album life can be achieved with new ChormaLife 100s FINE cartridge and Photo Paper Pro or Photo Paper Plus Glossy or Photo Paper Plus Semi-gloss or Glossy Photo Paper. This stylishly designed printer fits perfectly in any surroundings. The reasonable price of iP1980 makes it become the first choice of Students for printing solution.

From the design Canon ip1980 is same as pixma ip1880. If there are some problems in ip1980 such as waste ink absorber full error you just remember General Tools (resetter)for Canon Pixma ip 1880.

How to reset ink level on Canon Pixma iP1800

1. press power button while plug in the powerchord - green lamp.
2. while hold the power button press resume button twice - orange
blink and return to green.
3. release the power button, - the prnter will start.
4. try to print a page.
5. hope its work.

Note: If resetting the printer does not work, please attempt any other solutions.

Download Sofware Reset Reset Waste Ink Counter for Canon Pixma ip1980

step by step resetter canon iP1980 download
Read More..

How to Fix Windows System32 config system file missing or corrupt

When you start your Windows XP-Based computer, you may receive the following error message:

Windows could not start because the following file is missing or corrupt:
You can attempt to repair this file by starting windows setup using the original setup CD-ROM.
Select r at the first screen to start repair.

This problem may occur if "system" file is missing or corrupted:

To resolve this issue, you need an original or untouched copy of windows XP, and  configure the computer to boot from the CD-ROM or DVD-ROM drive and follow this steps.

1. Insert the Windows XP bootable CD into the computer.
2. When prompted to press any key to boot from the CD, press any key.

3. Once in the Windows XP setup menu press the "R" key to repair Windows.

4. Log into your Windows installation by pressing the "1" key and pressing enter.
5. You will then be prompted for your administrator password, enter your password is you have any, otherwise just press Enter.
6. At the command prompt type:
copy  %windir%Repairsystem  %windir%System32Config
 7. If prompt to overwrite the files just type "y" and hit enter. Once the file have been successfully copied, remove the CD from the computer and reboot.

Note: Once successfully booted to windows, you will notice that some of your drivers are not installed. Dont worry its normal when doing this repair procedure, Just reinstall your device driver and your done!

If you found this helpful, please leave a comment.
Read More..


Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printers carriage will "reset"
or move momentarily. If the above was properly performed the printer will enter the
"Service Mode".
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout. javascript:void(0)
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.
Read More..

Rabu, 09 Oktober 2013

Canon PIXMA MP780 Waste Ink Full

1) With the printer power turned off, while pressing the Resume/Cancel button,
press and hold the Power button. (DO NOT release the buttons. The Power LED
lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button.
(DO NOT release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times,
and then release both the Power and Resume/Cancel buttons. (Each time the
Resume/Cancel button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green, starting with Alarm LED.)
4) When the Power LED lights in green, press the Resume/Cancel button the specified
number of time(s) according to the function listed in the table below. (Each time
the Resume/Cancel button is pressed, the Alarm and
Power LEDs light alternately, Alarm in orange and Power in green, starting with
Alarm LED.) [hth: I believe the power button has to be pressed once more after
cycling the alarm button to complete the action. The power/resume-cancel button
LEDs toggle to help you count.]

Time(s) LED indication Function Remarks
0 times Green (Power) Power off When the print head is not installed,
the carriage returns and locks in the home position capped.
1 time Orange (Alarm) Service test print See 3-4. Verification Items,
(1) Service test print.
2 times Green (Power) EEPROM information print
See 3-4. Verification Items, (2) EEPROM information print.
3 times Orange (Alarm) EEPROM initialization [hth: does not re-initialize
Waste ink counter]
4 times Green (Power) Waste ink counter resetting
5 times Orange (Alarm) Destination settings [hth: not applicable]
6 times Green (Power) Print head deep cleaning (Cleaning of both black and color)

7-10 not applicable]
11 to 13 times Orange, Green, Orange (Alarm, Power, Alarm) Return to
the menu selection
14 not used in servicing
15 Orange (alarm) return to the menu selection,.

Note: If the Resume/Cancel button is pressed 16 or more times, the Alarm or Power LED lights steadily without
any changes.

[hth: if the alarm light is flashing 15 times at turn-on [cartridge not recognized error], none of these procedures seem to work. If anyone knows how to defeat this error, I would like to know.]
Read More..

ServiceTool V1050

Service Tool V1050

Download here
Read More..

Adjustment Program for Stylus C40UX C40SX C20UX C20SX Operating Instructions

1. Operating Environment:
l Windows95 OSR2.0 or higher and Windows98.
l (for Windows95)
LPT1-LPT3 are used.
(for Windows98)
LPT1-LPT3 and EPUSB1-EPUSB3 are used.
2. How to use the Adjustment Program:
Copy the Adjustment Program on the desktop, and then , execute the program.
3. Cautions:
1) When you confirm the function of USB port properly, you must use Windows98
pre-installed PC. It cannot function properly on Windows95.
2) When you operate this program on the Windows95 or Windows98, you cannot
operate it with Status Monitor is running. Close Status Monitor on Task tray
before start the Adjustment Program.
3) Do not change the setting for “Font size” in “settings tab” of the
“Display Property”window.
4) Please do not start the Adjustment Program before connecting the printer with
a parallel I/F cable or USB I/F cable.
If you do not follow the instruction, the program will freeze.
5) Please do not send any commands during Check Pattern printing.
6) In case of turning off the printer, or the parallel I/F cable or USB I/F
cable is removed during booting the Adjustment Program, please restart the Adjustment Program.

Adjustment Program for Stylus C40UX / C40SX / C20UX / C20SX : Download
Adjustment Program for Stylus C61/C62: Download
Read More..

Virus Effect Remover

Virus Effect Remover is a tool which helps you to remove the effect of viruses from the Windows Registry and File System. It also detects the registry error caused by viruses and enables the Blocked content like Task manager, registry editor, folder option, etc.This software enables your Admin restricted application and remove the changes which a virus does to protect itself.

It enables :

1: Registry Tools
2: Task manager
3: Group Policy Editor
4: Run command option in start Menu
5: Folder Option in Explorer & Control panel
6: Update check
7: File Menu
8: Find Menu
9: Log Off
10: Task Bar
Read More..

Applanet an Alternative Android Market

Applanet is an alternative android market. It is basically Installous for Android. You can download many (over 7000) apps that are up to date. It has a nice userbase and is updated regularly.

To use it, copy the .apk to your device and install it.


Read More..

Selasa, 08 Oktober 2013

canon waste tank reset for canon i70

Below is a procedure that in most cases should resolve a Canon i70 waste tank issue

1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button.

(Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button.

(Do not release the Power button.)

3) While holding the Power button, press the Resume/Cancel button 3 times, and then release the Power and Resume/Cancel buttons.

(Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

During initialization, the LED blinks in green.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button 4 times (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

After the function (menu) is selected, press the Power button. The LED lights in green, and the selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)

*** 4 times Green Waste ink counter resetting Both the main and borderless print waste ink counters are cleared.

Canon i70 InkJet Photo Printer
Manual service : Download
Driver Canon i70 : Download
Read More..

Fix for Special Force Online Hang up Problem

Did your PC crash or hang-up most of the time but only when playing SF or Special Force Online? Did you try to reinstall the game but still got the same result? Or even try to replaced the RAM and still get no good result?  If your processor is AMD Athlon X2 (Dual-Core) then try this:

1. Download and Install this file: AMD Processor Driver
2. Download and Install this file: AMD Dual-Core Optimizer
3. Restart your PC then try the game.

This works for me!
Read More..

Fix for Slow Boot up after installation of Dotnet Framework 4

Early this morning after I install dotNet Framework 4. My PC Start to boot very slow. So I search the internet for solution and luckily i found it.

Slowdown will happen if you have the following:

- Windows XP SP3
- installed .NET Framework 4

Here is what I found to fix the problem:

Solution A

1) Run cmd.exe from Start > Run
2) Type cd
3) Type cd C:WindowsMicrosoft.NETFrameworkv4.0.30319
4) Type NGEN executequeueditems and press Enter
5) It will take about 10minutes depending upon system speed. After the process is complete, the following prompt will appear in the command prompt C:WindowsMicrosoft.NETFrameworkv4.0.30319
6) Type exit to close the command prompt.

After performing these steps, your computer will boot up at usual speed.

Solution B 

Microsoft hasnt provided an official fix yet, but here is the fix that solves this slow system startup.

Just download the fix tool, unpack it and run. It will probably take few minutes to process.

From : RejZoR
Read More..

Canon MP390 Waste ink tank full

he sponge the original guy spoke about is not the waste ink sponge and cleaning it will not solve your problem. I ordered the pads and they are thick felt pads about 1/2 inch thick and about 5"X 2". You cannot access them without taking apart the printer. I have not done that yet as Im afraid I might never get it back together again. So Im continuing until it overflows. At that time I will take it apart with my camera to take detailed pics. I will post it if it works. If not, I will post the pic of my printer in the landfill. So the directions for resetting the counter is as follows. Spelling errors are not mine.

1)Printer on, press Additional Functions, Scan, Copy, Scan
Now you should be in service mode from there for waste ink tank reset

2)Select Test mode which is like the last avalabe selection
3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button

The menu will now say EEPRON Clear
Select Ink count which is option (0) and press set

Then press Stop/Reset Followed by the power button and then wait for it to restart.
Read More..

Senin, 07 Oktober 2013

Create Hotkey To Safely Remove USB Drive

Normally we remove USB Storage Device by Clicking "Safely Remove Hardware" Icon residing in our System Tray. For me its very annoying specially if you are in internet cafe business where a lot of customer bring a flashdrive with documents to print. And you have to Safely Remove the device for each and everyone in a tiresome way. So to make our life a little bit easier let do a small hack to Launch "Safely Remove Dialog Box" by Creating Shortcut or by assigning Hotkey.

To Create a Shortcut to the Safely Remove USB Devices:

1. Right-click on the desktop and choose New -->Shortcut
2. Then paste in the following into the location box:
Rundll32.exe shell32.dll,Control_RunDLL hotplug.dll
3. Next Give a Shortcut name.

To Assign a HotKey:

1. Right-click on the Created Shortcut icon.
2. Open the properties dialog, then go to the Shortcut tab.

3.  Now Assign a Shortcut key (Here i have assigned CTRL+ALT+Down).
4.  Close the dialog box.

Now you have a hotkey that  launch of Safely Remove Dialog Box.
Read More..

canon IP4200

Try this methods to reset Printer iP4200

Hope it can help you.

Good luck
Read More..

Solution on Linksys WRT120N wont Reset problem

Did you forgot your Linksys WRT120N Wi-fi password? or your router log-in password? or did you mess up the router setting and no other choose but to hard reset the router? luckily your linksys WRT120N router reset button is not working! No matter how many times you press and hold the reset button the router just wont reset.

The problem is your Linksys WRT120N router have an old firmware. Your only solution here is to upgrade your router firmware, you can download here and then follow this steps.(note: this solution is useful if your reset button is not working)

  1. Power ON the router while holding the reset button. (the router boots but just the power LED is on) now, connect the UTP cable to port #1 (notice that the LED for port #4 is on)
  2. After 30 to 60 seconds open a web browser and type in the address bar to connect to router bootloader.
  3. Then a router bootloader will appear that allows you to upload a new firmware. Navigate to the location of the latest firmware you download and click upload, wait for 1 to 2 minutes then restart the router using the restart button present on the same page(or turn OFF then ON the router)
  4. When it is fully up press and hold the reset button for 5 sec and the LED flash.
  5. Power OFF the router then power ON and your router is now reset to factory default.

Read More..

Canon BJC 5000

1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody
Read More..

Minggu, 06 Oktober 2013

38 Nice and Cool Netbook Wallpapers

Hand picked wallpapers specially formatted for netbooks. That fits in your Dell Mini, Samsung, Asus, AspireOne, Toshiba and many more. I hope you like it!

Broken Glass 
Available in 1024×600 1280×800 and 800×480 resolutions

Cool Waves
Available in 1024×600 1280×800 and 800×480 resolutions

Available in 1024×600 1280×800 and 800×480 resolutions

Trippy Windows 7
Available in 1024×600 1280×800 and 800×480 resolutions

Final Fantasy XIII
Available in 1024×600 resolutions

Pale Heretic
There are 18 Pale Heretics Wallpaper Available in 1024×600 resolutions

Guitar Island
Available in 1024×600, 1440×900 and 1680×1050 resolutions

Ryu vs Akuma
Available in 1024×600 1280×800 and 800×480 resolutions

Mini Cooper
Available in 1024×600 resolutions

Rain Drops
Available in 1024×600 1280×800 and 800×480 resolutions

Available in 1024×600 1280×800 and 800×480 resolutions

Black Cat on Scooter
Available in 1024×600 resolutions

Available in 1024×600 resolution

Blue Planet
Available in 1024×600 resolution

Super Mario in Milky Sky
Available in 1024×600 resolution

Fire Flower
Available in 1024×600 resolution

Cute Puppies
Available in 1024×600 resolution

Spring Flower
Available in 1024×600 resolution

Yellow Spring Flower
Available in 1024×600 resolution

Strange World
Available in 1024×600 resolution

Iron Man 2
Available in 1024×600 resolution

Wanson Leaf
Available in 1024×600 resolution

The Lich King
Available in 1024×600 resolution

Colin Mcrae Rally
Available in 1024×600 resolution

Available in 1024×600 resolution

Available in 1024×600 resolution

Shiny Tree
Available in 1024×600 resolution

Yoshis Playground
Available in 1024×600 resolution

Sleeping Puppy
Available in 1024×600 resolution

Train Station
Available in 1024×600 resolution

Diablo 3
Available in 1024×600 resolution

WanChai Hong Kong
Available in 1024×600 resolution

Be Original
Available in 1024×600 resolution

Positive Energy
Available in 1024×600 resolution

Available in 1024×600 resolution

We Only want the OS
Available in 1024×600 resolution

Onion Head
Available in 1024×600 resolution

Available in 1024×600 resolution

Read More..