Ads 468x60px

Pages

Rabu, 14 Agustus 2013

Fixing error code oxc18a0206 on HP printers


This error appears on these printers: C7180, C7280,  C5180, C6150, Photosmart 3310, etc...

Solution 1:
  • Press * and # at the same time
  • Press 1, 2, 3 and “support R0632M” should display
  • Press > and “information menu” should display
  • Press > and “configuration menu” should display
  • Press OK and “hardware failure status” should display
  • Press OK “failure status: clear”. Press OK to clear
  • Press CANCEL
  • Press CANCEL
  • Press CANCEL
  • Turn printer off, unplug power cord for 2 minutes, plug cord back in then turn printer back on.

Solution 2:


  • Without turning off the product, disconnect the USB cable from the rear of the product.
  • Remove the cartridges from the product.
  • Wait for the Insert Cartridges message to display on the control panel.
  • Disconnect the power cord from the back of the product.
  • Wait 60 seconds.
  • Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
  • Reinsert the cartridges, and then close any open doors on the product.
  • If you receive a prompt to print a calibration page, do so.
  • Reconnect the USB cable to the rear of the product, and then try printing again.

Related Posts by Categories

0 komentar:

Posting Komentar