Pages

Minggu, 07 Agustus 2016

resetter dan eror code canon seri MP



MERESET WASTE INK COUNTER PADA
CANON MP160 DAN MP145
1. Matikan printer (kabel power masih
tercolok), tekan dan tahan tombol
STOP/RESET kemudian tekan tombol
ON/OFF
2. Tahan tombol ON/OFF, tekan tombol
STOP/RESET 2x


3. Lepaskan kedua tombol dan printerakan masuk ke SERVICE MODE
4. Printer akan charging
5. Setelah printer selesai charging,tekan tombol STOP/RESET 4x.
6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF
akan berubah warna hijau dan oranye.
7. Matikan printer dan cabut kabel POWER.
8. Hidupkan kembali printer


Kode Error Canon MP160 dan MP145
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported
ink cartridge is installed, or the ink cartridges are not
installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support
Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

ini nich yang mau donlot resetternya....
MPTool.exe

Related Posts by Categories

0 komentar:

Posting Komentar