Solution 1:
That error indicates a power supply problem internally in the unit. You will need to call HP to obtain the replacement part or get it replaced free under warranty.
Solution 2:
You can reset the product, if you are lucky it will works:
- Without turning off the product, disconnect the USB cable from the rear of the product.
- Remove the cartridges from the product.
- Wait for the Insert Cartridges message to display on the control panel.
- Disconnect the power cord from the back of the product.
- Wait 60 seconds.
- Reconnect the power cord. If the product does not automatically turn on, press the Power button.
- Reinsert the cartridges, and then close any open doors on the product.
- If you receive a prompt to print a calibration page, do so.
- Reconnect the USB cable to the rear of the product, and then try printing again.
0 komentar:
Posting Komentar