Error 5B00 on Canon Pixma MP110

This error means that the waste ink counter is full, you have to reset it.

Solution for Error 5B00 on Canon Pixma MP110:

1. Turn on the machine
2. Press MENU
3. Press SCAN COPY SCAN to enter service mode
4. USE > to got to NVRAM ACCESS
5. Set ABS-M LEVEL to 0
6. Set ABS-P LEVEL to 0
7. Press STOP to EXIT

Read More..

How to fix error 0xc18a0401 oxc18a0401 on HP printers

Solution 1:

• Press and hold the "*" key. Press the "#" key and release both keys. Display should say "Enter Special Key Combo"
• Press and release in sequence the "1", "2" and "3" buttons. Display should say "Support" and display the FW rev (something like R0631R).
• Press and release the right arrow button until the display says "System Configuration Menu".
• Press and release the "OK" button. Display should say "Hardware failure status". If not there already, Arrow Key over to "Hardware failure status",
  Press and release the "OK" button. Display should say "Hardware failure status: Clear. Press OK to clear".
• Press and release the "OK" Button. Message changes to "Hardware failure status Cleared. Press Cancel to continue".
• Press and release the "CANCEL" button as many times as necessary, until the "Welcome to Photosmart Express" screen appears, or, the "Ink System Failure" screen appears. Do not try to print at this stage.
• Using the Power Button, turn the unit OFF and unplug the power cable from back of the printer and wall outlet.
• Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first and then into the back of the printer.
• Turn the unit on. The printer may display message "Use Power button to shutdown the printer" followed by "Press OK to continue". 
• Press OK. The Printer will start the "One time ink initialization process". Allow this process to complete and do not interrupt. 
• Once the initialization process is complete, the printer will print out a Diagnostic Page. 

Solution 2:

• Unplug the power from behind the printer.
• Wait for 60 seconds. 
• Hold down the “print photo” and “cancel” at the same time. You should be able to see it with a blank screen for several seconds.
• Its done
• Try again and again if at first it doesnt work.

Solution 3:

• Unplug the all-in-one from power.
• Wait 30 seconds.
• Plug in the power only.
• Repeat steps 2-4 two more times.
• On the third time after plugging the unit into power check the functionality. 

Solution 4:

• Unplug the power cord from the back of the HP All-in-One.
• Wait for the unit to go to the sleep mode. Wait for 60 seconds.
• Press and hold Print Photos & Photo Fix buttons simultaneously on the control panel; keep them pressed and reconnect the power cord to the All-in-One.
• Continue pressing the buttons until the display goes blank or Reset shows on the control panel display.

Solution 5:

• See Ink System Failure on HP Photosmart C6180

Read More..

Disclaimer

Privacy
The owner of this blog does not share personal information with third-parties nor does the owner store information is collected about your visit for use other than to analyze content performance through the use of cookies, which you can turn off at anytime by modifying your Internet browser’s settings. The owner is not responsible for the republishing of the content found on this blog on other Web sites or media without permission.

Blog Comments
The owner of this blog reserves the right to edit or delete any comments submitted to this blog without notice due to;

1. Comments deemed to be spam or questionable spam


2. Comments including profanity


3. Comments containing language or concepts that could be deemed offensive


4. Comments that attack a person individually

Terms and Conditions
All content provided on this blog is for informational purposes only. The owner of this blog makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site. The owner will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.

This policy is subject to change at anytime.

Read More..

How to fix Error 46 on Brother printers

To fix error 46 you have to reset the purge counter.


Solution:

• Enter machine maintenance mode (on MFC210C all four photo/copy/fax/scan lights flash in maintenance mode).
• FAX models with numerical keypads: Press the Menu/Set, *, 2, 8, 6 and 4 keys within two seconds. (if you fail to complete the correct key sequence within two seconds, press the Stop key to try again).
• Other (non-FAX) models: Press the Menu/Set and Black Start keys. Next press the “up arrow” key four times to enter the maintenance mode).
• Press the 8 then 0 keys in the initial stage of the maintenance mode to call up the machines log information list (function code 80).
• Press the Black Start key several times to scroll through the log information list to reach the purge counter.
• Press the 2, 7, 8, and 3 keys in this order to reset the purge count to zero.
• Press the Stop/Exit key to return to the initial stage of the maintenance mode.
• Press the 9 key twice to return to the standby state.

If you want to replace the absorber box:

• LF7443001: Ink Absorber Weld Assy

Read More..

Unable to clean 46 error message on Brothers printers

Solution 1:

• Pull out the AC plug.
• Put back the AC plug while holding down the "Menu" button and keep holding it (15 sec): youre entering the Maintenance mode and "error 46" pops up in the display.
• Select 8 by using the arrow buttons, push "OK" and select "0" and push "OK"
• Message 00:00 00:01 OK appears.
• Push the "Mono" button 25 times until you see PURGE: xxxxx
• Select 2, push ok, select 7,push ok,select 8,push ok, select 3,push ok
• Purge counter indicates: purge: 00000
• Switch off the printer, switch it on.

Solution 2: reset the ink counter

• Press buttons OK, Menu, Mono Start one by one, followed by up arrow key four times. this should all be done as short a time as possible, around 3 seconds.
• Enter maintenance mode 80,  by pressing the up/down arrow key and set key to select numbers 8 and 0
• Press blue MONO start button to select PURGE which requires it to be pressed a number of times before PURGE appears on the LCD screen of the printer
• Use the updown key and OK button to enter the reset code 2, 7, 8 and 3 keys to reset the counter.
  Press Stop/Exit key to go to root of maintenance mode.
• Enter 9,9 to exit maintenance mode

Read More..

Resetter Epson R390

Download resetter, Epson R390 adjustment program

Download resetter, Epson R390 adjustment program

Read More..

Fixing error U072 on Canon printers

Solution 1:

• Open the cover
• Remove the cartridges.
• Power off the printer
• Power on the printer
• Réinstall the cartridges
• Close the cover.

Solution 2:

•  Verify that the ink tank are installed in the appropriate positions.
• Change the faulty cartridge

Solution 3:

• Clean the printhead

Read More..